Home › Wheel loaders › Case

Case 1021G

Configuration: Z-Bar loader arms, 4.2 m³ (5.5 yd³) pin-on bucket with bolt-on edge, 26.5-R25 L3 radial tires, ROPS cab with heat/A/C, standard counterweight, full fuel, 75 kg operator; FPT F2CFE614M Tier 4 Final/Stage V.

25 sourced values · Sources: Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25

Check trailer fitDownload CSV

Dimension diagram

A B C D E F Side viewFront view Schematic, not to scale
AOverall length8,948 mm
BOverall height3,577 mm
CWheelbase3,550 mm
DGround clearance437 mm
EOverall width2,978 mm
FTrack gauge / tread2,300 mm

Weights

SpecValueSource
Operating weight25,567 kg
Published: 25,567 kg
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Z-Bar, 5.5 yd³ pin-on bucket with bolt-on edge column (56,365 lb).

Dimensions

SpecValueSource
Overall length8,948 mm
Published: 8,948 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Bucket level on ground, Z-Bar, 5.5 yd³ pin-on bucket.
Overall width2,978 mm
Published: 2,978 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Overall without bucket (bucket width 3195 mm).
Overall height3,577 mm
Published: 3,577 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Height to top of ROPS cab.
Wheelbase3,550 mm
Published: 3,550 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Track gauge / tread2,300 mm
Published: 2,300 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Tread width.
Ground clearance437 mm
Published: 437 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Turning radius6,366 mm
Published: 6,366 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Outside, 26.5-R25 L3 radial tires. Loader clearance circle with bucket 14 177 mm (diameter).

Undercarriage / tires

SpecValueSource
Undercarriage typeWheeled, articulated
Published: Wheeled, articulated
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Number of axles2
Published: 2
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Wheels (count)4
Published: 4
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Tire size26.5-R25
Published: 26.5-R25
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
L3 radial.

Ground pressure

SpecValueSource
Ground pressureNot publishedCase 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Not published in this document.

Axle loads

SpecValueSource
Axle load, front (unladen/operating)Not publishedCase 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Not published in this document.
Axle load, rear (unladen/operating)Not publishedCase 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Not published in this document.

Engine

SpecValueSource
Engine modelFPT F2CFE614M*V002
Published: FPT F2CFE614M*V002
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Tier 4 Final/Stage V certified.
Net power201 kW
Published: 201 kW
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Net rated at 2,100 rpm, SAE J1349 (270 hp); peak net 227 kW at 1,800 rpm.
Gross power237 kW
Published: 237 kW
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Peak gross at 1,800 rpm, SAE J1995 (318 hp).
Displacement8.7 L
Published: 8.7 L
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
531 in³.
Rated speed2,100 rpm
Published: 2,100 rpm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Engine speed, rated full load.

Hydraulics

SpecValueSource
Pump / aux flow352 L/min
Published: 352 L/min
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Sum of max rated flow P1 190 L/min (50.2 gpm) and P2 162 L/min (42.8 gpm) at 2,000 rpm.
System / relief pressure≈ 25.2 MPa
Published: 25,165 kPa
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Implement (3,650 psi); steering 24 097 kPa.

Performance

SpecValueSource
Max travel speed35.4 km/h
Published: 35.4 km/h
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
4th forward, 4-speed transmission, 26.5-R25 L3 radial tires (22.0 mph).
Bucket capacity4.21 m³
Published: 4.21 m³
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
SAE heaped (5.50 yd³).
Tipping load17,745 kg
Published: 17,745 kg
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
40° turn, ISO rigid tires (39,121 lb). Deflected tires 16 201 kg; straight rigid 21 861 kg.
Breakout / digging force≈ 200 kN
Published: 45,056 lbf
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
With tilt cylinder (20 437 kg).
Dump height / clearance3,078 mm
Published: 3,078 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Fully raised, 45° dump, Z-Bar.
Lift / hinge-pin height4,246 mm
Published: 4,246 mm
Case 1021G Z-Bar/XR Wheel Loader spec sheet, Form No. CCE2024101021G (effective July 2024, replaces CCE2022041021G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 1021G product page. Retrieved 2026-10-25
Hinge pin height fully raised, Z-Bar.

Similar models

BrandModelOperating weight
KomatsuWA475-1125,620 kg
KomatsuWA475-1025,510 kg
KomatsuWA480-825,960 kg
John Deere744 P-Tier24,907 kg
Caterpillar97224,890 kg
Caterpillar972 XE24,890 kg

Compare side by side with Komatsu WA475-11 and Komatsu WA475-10