Home › Backhoe loaders › Case
Case 580N EP
Configuration: 2WD, ROPS/FOPS canopy, GP (long lip) loader bucket, Extendahoe with 4-stick mechanical backhoe controls, standard 4F-4R Power Shuttle, 11.0 L x 16.0 front and 19.5 L x 24.0 rear tires, 900 lb front counterweight (SAE Configuration 1); FPT F5HFL463D Tier 4 Final.
24 sourced values · Sources: CASE 580N EP Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580NEP, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580n-ep (CNH content hub). Retrieved 2026-10-25
Dimension diagram
| A | Overall length | ≈ 7,020 mm |
| B | Overall height | ≈ 2,660 mm |
| C | Wheelbase | ≈ 2,130 mm |
| D | Ground clearance | 380 mm |
| E | Overall width | ≈ 2,170 mm |
| F | Track gauge / tread | Not published |
Weights
| Spec | Value | Source |
|---|---|---|
| Operating weight | ≈ 7,255 kg | Published: 15,995 lb CASE 580N EP Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580NEP, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580n-ep (CNH content hub). Retrieved 2026-10-25SAE transport Configuration 1: GP loader bucket, 2WD, canopy, boom guard, full fuel, Extendahoe, 4-stick mechanical backhoe, standard transmission, 19.5 L x 24 rear tires, 900 lb front counterweight (7 255 kg). Configuration 2 (4WD, cab, AC, pilot controls, standard dipper): 16,093 lb. |
Dimensions
Undercarriage / tires
Ground pressure
| Spec | Value | Source |
|---|---|---|
| Ground pressure | Not published | CASE 580N EP Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580NEP, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580n-ep (CNH content hub). Retrieved 2026-10-25 Not published in this document. |
Axle loads
| Spec | Value | Source |
|---|---|---|
| Axle load, front (unladen/operating) | Not published | CASE 580N EP Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580NEP, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580n-ep (CNH content hub). Retrieved 2026-10-25 Not published in this document. |
| Axle load, rear (unladen/operating) | Not published | CASE 580N EP Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580NEP, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580n-ep (CNH content hub). Retrieved 2026-10-25 Not published in this document. |
Engine
Hydraulics
| Spec | Value | Source |
|---|---|---|
| Pump / aux flow | ≈ 108 L/min | Published: 28.5 gpm CASE 580N EP Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580NEP, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580n-ep (CNH content hub). Retrieved 2026-10-25Single-section gear pump; loader and backhoe flow 28.5 gpm at 3,350 psi at rated rpm (108 L/min at 231 bar). |
| System / relief pressure | ≈ 23.1 MPa | Published: 3,350 psi CASE 580N EP Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580NEP, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580n-ep (CNH content hub). Retrieved 2026-10-25Main relief, standard, ±50 psi (231 bar). |
Performance
Similar models
| Brand | Model | Operating weight |
|---|---|---|
| Caterpillar | 415 | 7,384 kg |
| Caterpillar | 416 | 7,499 kg |
| John Deere | 310 P-Tier | 6,904 kg |
| John Deere | 320 P-Tier | 7,748 kg |
| Caterpillar | 420 | 7,834 kg |
| Caterpillar | 420 XE | 7,834 kg |
Compare side by side with Caterpillar 415 and Caterpillar 416