Home › Head-to-head › Compact track loaders
John Deere 333 P-Tier vs Takeuchi TL12R-2
Published specs and dimensions of two compact track loaders side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The John Deere 333 P-Tier is 106 lb (48 kg) lighter, 4 in (89 mm) wider, 4 in (109 mm) lower and 2 ft 1 in (635 mm) longer than the Takeuchi TL12R-2.
- Gross power: 80.9 kW / 108 hp (John Deere 333 P-Tier) vs 83 kW / 111.3 hp (Takeuchi TL12R-2); Takeuchi TL12R-2 is higher.
- Shoe / track width: 450 mm / 17.7 in (John Deere 333 P-Tier) vs 450 mm / 17.7 in (Takeuchi TL12R-2); John Deere 333 P-Tier is higher.
- Ground clearance: 250 mm / 9.84 in (John Deere 333 P-Tier) vs 320 mm / 12.6 in (Takeuchi TL12R-2); Takeuchi TL12R-2 is higher.
- Ground pressure: 32.8 kPa / 4.76 psi (John Deere 333 P-Tier) vs 31.7 kPa / 4.6 psi (Takeuchi TL12R-2); John Deere 333 P-Tier is higher.
- Displacement: 3.1 L / 189 cu in (John Deere 333 P-Tier) vs 3.77 L / 230 cu in (Takeuchi TL12R-2); Takeuchi TL12R-2 is higher.
- Pump / aux flow: 95 L/min / 25.1 gpm (John Deere 333 P-Tier) vs 88.2 L/min / 23.3 gpm (Takeuchi TL12R-2); John Deere 333 P-Tier is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
John Deere 333 P-Tier specs Takeuchi TL12R-2 specs Open in interactive compare Trailer fit: John Deere 333 P-Tier Trailer fit: Takeuchi TL12R-2
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | John Deere 333 P-Tier | Takeuchi TL12R-2 |
|---|---|---|
| Weights | ||
| Operating weight | 5,531 kg | ≈ 5,579 kg |
| Dimensions | ||
| Overall length | 3,840 mm | ≈ 3,205 mm |
| Overall width | 2,050 mm | ≈ 1,961 mm |
| Overall height | 2,220 mm | ≈ 2,329 mm |
| Track gauge / tread | Not published | Not captured |
| Track length on ground | Not published | ≈ 1,715 mm |
| Shoe / track width | 450 mm | ≈ 450 mm |
| Ground clearance | 250 mm | ≈ 320 mm |
| Undercarriage / tires | ||
| Undercarriage type | Rubber tracks | Rubber tracks |
| Ground pressure | ||
| Ground pressure | 32.8 kPa | ≈ 31.7 kPa |
| Engine | ||
| Engine model | Yanmar 4TNV94FHT | Kubota V3800-TIEF4B |
| Net power | 78.9 kW | Not published |
| Gross power | 80.9 kW | ≈ 83 kW ⚠ The manufacturer does not state the rating standard (gross or net). Filed as gross power; compare with care. |
| Displacement | 3.1 L | ≈ 3.77 L |
| Rated speed | 2,500 rpm | Not captured |
| Hydraulics | ||
| Pump / aux flow | 95 L/min | ≈ 88.2 L/min |
| System / relief pressure | 24.132 MPa | ≈ 24 MPa |
| Performance | ||
| Rated / lift capacity | 1,748 kg | ≈ 1,349 kg |
| Tipping load | 4,994 kg | ≈ 3,915 kg |
| Lift / hinge-pin height | 3,350 mm | ≈ 3,200 mm |
| Dump height / clearance | 2,690 mm | ≈ 2,400 mm |
| Breakout / digging force | ≈ 61.2 kN ⚠ Published as 6,243 kg, read as kilogram-force (kgf) for conversion. | ≈ 36.5 kN |
| Max travel speed | 13.7 km/h | ≈ 11.7 km/h |
Configurations.
John Deere 333 P-Tier: 450 mm tracks, cab, standard flow
Takeuchi TL12R-2: Canopy, 17.7 in rubber tracks, radial lift; Tier 4