Home › Backhoe loaders › Case
Case 580SN WT
Configuration: 4WD, 2-door cab with heat and A/C, 4-in-1 loader bucket, Extendahoe (retracted for dig data), pilot backhoe controls, H-type PowerDrive transmission, 12.5/80 x 18.0 front and 21.0 L x 24.0 rear tires, 1,100 lb counterweight; FPT F5BFL413B Tier 4 Final.
Dimension diagram
| A | Overall length | ≈ 7,040 mm |
| B | Overall height | ≈ 2,730 mm |
| C | Wheelbase | ≈ 2,150 mm |
| D | Ground clearance | 377 mm |
| E | Overall width | ≈ 2,590 mm |
| F | Track gauge / tread | Not published |
Weights
| Spec | Value | Source |
|---|---|---|
| Operating weight | ≈ 9,417 kg | Published: 20,760 lb CASE 580SN WT Construction King Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580SNWT, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580-super-n-wt-construction-king (CNH content hub). Retrieved 2026-10-25SAE transport configuration, printed as no operator: 4-in-1 loader bucket, Extendahoe, 2-door cab with heat and AC, 1,100 lb counterweight, full fuel, Heavy Lift, PowerDrive transmission, air seat, ride control, pilot backhoe controls, 4WD with driveshaft guard, 21 L x 24 rear tires (9 417 kg). |
Dimensions
Undercarriage / tires
Ground pressure
| Spec | Value | Source |
|---|---|---|
| Ground pressure | Not published | CASE 580SN WT Construction King Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580SNWT, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580-super-n-wt-construction-king (CNH content hub). Retrieved 2026-10-25 Not published in this document. |
Axle loads
| Spec | Value | Source |
|---|---|---|
| Axle load, front (unladen/operating) | Not published | CASE 580SN WT Construction King Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580SNWT, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580-super-n-wt-construction-king (CNH content hub). Retrieved 2026-10-25 Not published. Axle ratings only. |
| Axle load, rear (unladen/operating) | Not published | CASE 580SN WT Construction King Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580SNWT, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580-super-n-wt-construction-king (CNH content hub). Retrieved 2026-10-25 Not published. Axle ratings only. |
Engine
Hydraulics
| Spec | Value | Source |
|---|---|---|
| Pump / aux flow | ≈ 155 L/min | Published: 41 gpm CASE 580SN WT Construction King Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580SNWT, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580-super-n-wt-construction-king (CNH content hub). Retrieved 2026-10-25Variable-displacement axial piston pump; loader flow at rated rpm printed 41 gpm at 2,340 psi (156.2 L/min); standard-equipment list prints 41 gpm at 3,000 psi. |
| System / relief pressure | ≈ 23.8 MPa | Published: 3,450 psi CASE 580SN WT Construction King Backhoe Loader specification sheet (Tier 4 Final), Form No. CCE202012580SNWT, linked from casece.com product page https://www.casece.com/en-us/northamerica/products/backhoe-loaders/580-super-n-wt-construction-king (CNH content hub). Retrieved 2026-10-25Main relief, standard, ±50 psi (238 bar); Power Lift 3,780 psi. |
Performance
Similar models
| Brand | Model | Operating weight |
|---|---|---|
| Caterpillar | 440 | 9,910 kg |
| Caterpillar | 430 | 8,188 kg |
| Caterpillar | 450 | 11,033 kg |
| John Deere | 410 P-Tier | 7,975 kg |
| Case | 590SN | 9,673 kg |
| Caterpillar | 420 | 7,834 kg |
Compare side by side with Caterpillar 440 and Caterpillar 430