Home › Wheel loaders › Case
Case 521G
Configuration: Z-Bar loader arms, 1.6 m³ (2.1 yd³) general purpose pin-on bucket with bolt-on edge, 17.5-R25 L3 radial tires, ROPS cab with heat/A/C, heavy counterweight, front and rear fenders, full fuel, 75 kg operator; FPT F4HFE413Z Tier 4 Final/Stage V.
25 sourced values · Sources: Case 521G Wheel Loader spec sheet, Form No. CCE202407521G (effective July 2024, replaces CCE202104521G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 521G product page. Retrieved 2026-10-25
Dimension diagram
| A | Overall length | 6,612 mm |
| B | Overall height | 3,275 mm |
| C | Wheelbase | 2,750 mm |
| D | Ground clearance | 341 mm |
| E | Overall width | 2,448 mm |
| F | Track gauge / tread | 2,000 mm |
Weights
| Spec | Value | Source |
|---|---|---|
| Operating weight | 10,978 kg | Published: 10,978 kg Case 521G Wheel Loader spec sheet, Form No. CCE202407521G (effective July 2024, replaces CCE202104521G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 521G product page. Retrieved 2026-10-25Z-Bar, 2.1 yd³ pin-on bucket with bolt-on edge column (24,203 lb). |
Dimensions
Undercarriage / tires
Ground pressure
| Spec | Value | Source |
|---|---|---|
| Ground pressure | Not published | Case 521G Wheel Loader spec sheet, Form No. CCE202407521G (effective July 2024, replaces CCE202104521G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 521G product page. Retrieved 2026-10-25 Not published in this document. |
Axle loads
| Spec | Value | Source |
|---|---|---|
| Axle load, front (unladen/operating) | Not published | Case 521G Wheel Loader spec sheet, Form No. CCE202407521G (effective July 2024, replaces CCE202104521G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 521G product page. Retrieved 2026-10-25 Not published in this document. |
| Axle load, rear (unladen/operating) | Not published | Case 521G Wheel Loader spec sheet, Form No. CCE202407521G (effective July 2024, replaces CCE202104521G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 521G product page. Retrieved 2026-10-25 Not published in this document. |
Engine
Hydraulics
| Spec | Value | Source |
|---|---|---|
| Pump / aux flow | 134 L/min | Published: 134 L/min Case 521G Wheel Loader spec sheet, Form No. CCE202407521G (effective July 2024, replaces CCE202104521G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 521G product page. Retrieved 2026-10-25Variable-displacement load-sensing pump at 2,000 rpm (35.4 gpm). |
| System / relief pressure | ≈ 25 MPa | Published: 24,993 kPa Case 521G Wheel Loader spec sheet, Form No. CCE202407521G (effective July 2024, replaces CCE202104521G), Tier 4 Final/Stage V; linked from casece.com/en-us/northamerica 521G product page. Retrieved 2026-10-25High pressure standby (3,625 psi). |
Performance
Similar models
| Brand | Model | Operating weight |
|---|---|---|
| HD Hyundai | HL930A | ≈ 11,610 kg |
| Hitachi | ZW140-7 | 11,680 kg |
| John Deere | 444 P-Tier | 11,709 kg |
| Komatsu | WA200-8 | 11,715 kg |
| Develon | DL200-7 | 12,047 kg |
| Volvo | L60H | 12,100 kg |
Compare side by side with HD Hyundai HL930A and Hitachi ZW140-7