Home › Head-to-head › Telehandlers
JLG SkyTrak 10054 vs Manitou MTA 10055 Series IV
Published specs and dimensions of two telehandlers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The JLG SkyTrak 10054 is 400 lb (181 kg) lighter, 2 in (51 mm) wider and 2 in (51 mm) lower than the Manitou MTA 10055 Series IV.
Both list the same overall length.
- Gross power: 82 kW / 110 hp (JLG SkyTrak 10054) vs 89 kW / 119 hp (Manitou MTA 10055 Series IV); Manitou MTA 10055 Series IV is higher.
- Wheelbase: 3,048 mm / 10 ft 0 in (JLG SkyTrak 10054) vs 3,150 mm / 10 ft 4 in (Manitou MTA 10055 Series IV); Manitou MTA 10055 Series IV is higher.
- Turning radius: 4,216 mm / 13 ft 10 in (JLG SkyTrak 10054) vs 4,242 mm / 13 ft 11 in (Manitou MTA 10055 Series IV); Manitou MTA 10055 Series IV is higher.
- Pump / aux flow: 74.2 L/min / 19.6 gpm (JLG SkyTrak 10054) vs 155 L/min / 41 gpm (Manitou MTA 10055 Series IV); Manitou MTA 10055 Series IV is higher.
- Max travel speed: 31.5 km/h / 19.6 mph (JLG SkyTrak 10054) vs 32.2 km/h / 20 mph (Manitou MTA 10055 Series IV); Manitou MTA 10055 Series IV is higher.
- Lift / hinge-pin height: 16,205 mm / 53 ft 2 in (JLG SkyTrak 10054) vs 16,764 mm / 55 ft 0 in (Manitou MTA 10055 Series IV); Manitou MTA 10055 Series IV is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
JLG SkyTrak 10054 specs Manitou MTA 10055 Series IV specs Open in interactive compare Trailer fit: JLG SkyTrak 10054 Trailer fit: Manitou MTA 10055 Series IV
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | JLG SkyTrak 10054 | Manitou MTA 10055 Series IV |
|---|---|---|
| Weights | ||
| Operating weight | ≈ 12,428 kg | ≈ 12,610 kg |
| Max gross (laden) weight | ≈ 19,100 kg | Not published |
| Dimensions | ||
| Overall length | ≈ 6,401 mm | ≈ 6,401 mm |
| Overall width | ≈ 2,591 mm | ≈ 2,540 mm |
| Overall height | ≈ 2,540 mm | ≈ 2,591 mm |
| Wheelbase | ≈ 3,048 mm | ≈ 3,150 mm |
| Track gauge / tread | Not published | Not published |
| Ground clearance | ≈ 457 mm | ≈ 457 mm |
| Turning radius | ≈ 4,216 mm | ≈ 4,242 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, 4WD / 4WS | Wheeled, 4WD / 4WS |
| Number of axles | 2 | 2 |
| Wheels (count) | 4 | 4 |
| Tire size | 400/75-28 | 14x24 |
| Ground pressure | ||
| Max tire ground bearing pressure (floor loading) | ≈ 1,413 kPa ⚠ Tire ground bearing pressure (one tire, max-laden axle) from a floor-loading sheet. Not comparable to the average ground pressure of tracked machines. | Not published |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not published | Not published |
| Axle load, rear (unladen/operating) | Not published | Not published |
| Axle load, front (laden/max) | Not published | Not published |
| Axle load, rear (laden/max) | Not published | Not published |
| Engine | ||
| Engine model | Cummins F3.8 | Deutz TCD 3.6 L4, Tier 4 Final |
| Net power | Not published | Not published |
| Gross power | ≈ 82 kW | 89 kW ⚠ The manufacturer does not state the rating standard (gross or net). Filed as gross power; compare with care. |
| Displacement | ≈ 3.8 L | Not published |
| Rated speed | 2,500 rpm | Not published |
| Hydraulics | ||
| Pump / aux flow | ≈ 74.2 L/min | ≈ 155 L/min |
| System / relief pressure | Not published | ≈ 20.7 MPa |
| Performance | ||
| Max travel speed | ≈ 31.5 km/h | ≈ 32.2 km/h |
| Rated / lift capacity | ≈ 4,536 kg | ≈ 4,536 kg |
| Lift / hinge-pin height | ≈ 16,205 mm | ≈ 16,764 mm |
| Max forward reach | ≈ 11,836 mm | ≈ 12,548 mm |
Configurations.
JLG SkyTrak 10054: Standard specification, 400/75-28 pneumatic tires, Cummins F3.8 110 hp (74 hp engine optional)
Manitou MTA 10055 Series IV: Torque converter 4F/3R, 14x24 tires, Deutz TCD 3.6 L4 (89 kW) Tier 4 Final