Home › Head-to-head › Mini excavators
Kubota U55-5 vs Takeuchi TB260
Published specs and dimensions of two mini excavators side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Kubota U55-5 is 87 lb (39 kg) heavier, 2 in (43 mm) narrower, 1 in (36 mm) lower and 2 ft 2 in (649 mm) shorter than the Takeuchi TB260.
- Track length on ground: 1,981 mm / 6 ft 6 in (Kubota U55-5) vs 2,050 mm / 6 ft 9 in (Takeuchi TB260); Takeuchi TB260 is higher.
- Track length (overall): 2,489 mm / 8 ft 2 in (Kubota U55-5) vs 2,576 mm / 8 ft 5 in (Takeuchi TB260); Takeuchi TB260 is higher.
- Ground clearance: 310 mm / 12.2 in (Kubota U55-5) vs 330 mm / 13 in (Takeuchi TB260); Takeuchi TB260 is higher.
- Ground pressure: 31.7 kPa / 4.6 psi (Kubota U55-5) vs 30.3 kPa / 4.4 psi (Takeuchi TB260); Kubota U55-5 is higher.
- Displacement: 2.62 L / 159.6 cu in (Kubota U55-5) vs 2.09 L / 127.6 cu in (Takeuchi TB260); Kubota U55-5 is higher.
- Pump / aux flow: 149 L/min / 39.4 gpm (Kubota U55-5) vs 161 L/min / 42.4 gpm (Takeuchi TB260); Takeuchi TB260 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Kubota U55-5 specs Takeuchi TB260 specs Open in interactive compare Trailer fit: Kubota U55-5 Trailer fit: Takeuchi TB260
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Kubota U55-5 | Takeuchi TB260 |
|---|---|---|
| Weights | ||
| Operating weight | ≈ 5,555 kg | ≈ 5,516 kg |
| Dimensions | ||
| Overall length | 5,475 mm | ≈ 6,124 mm |
| Overall width | ≈ 1,956 mm | ≈ 1,999 mm |
| Overall height | ≈ 2,540 mm | ≈ 2,576 mm |
| Track length on ground | ≈ 1,981 mm | ≈ 2,050 mm |
| Track length (overall) | ≈ 2,489 mm | ≈ 2,576 mm |
| Shoe / track width | ≈ 399 mm | ≈ 399 mm |
| Ground clearance | ≈ 310 mm | ≈ 330 mm |
| Tail swing radius | Not published | ≈ 1,300 mm |
| Undercarriage / tires | ||
| Undercarriage type | Rubber tracks | Rubber tracks |
| Ground pressure | ||
| Ground pressure | ≈ 31.7 kPa | ≈ 30.3 kPa |
| Engine | ||
| Engine model | Kubota V2607-CR-E5-BH1 | Yanmar 4TNV86CT |
| Net power | ≈ 34.6 kW | Not published |
| Gross power | Not captured | ≈ 35.5 kW ⚠ The manufacturer does not state the rating standard (gross or net). Filed as gross power; compare with care. |
| Displacement | ≈ 2.62 L | ≈ 2.09 L |
| Hydraulics | ||
| Pump / aux flow | ≈ 149 L/min | ≈ 161 L/min |
| System / relief pressure | Not published | ≈ 24 MPa |
| Performance | ||
| Max digging depth | ≈ 3,632 mm | ≈ 3,894 mm |
| Max reach (at ground) | Not captured | ≈ 6,129 mm |
| Dump height / clearance | ≈ 4,001 mm | ≈ 4,219 mm |
| Breakout / digging force | ≈ 45.2 kN | ≈ 56.7 kN |
| Max travel speed | ≈ 4.99 km/h | ≈ 4.83 km/h |
Configurations.
Kubota U55-5: Canopy, rubber tracks, standard blade; tight tail swing
Takeuchi TB260: Canopy, standard arm (5 ft 10.1 in), 15.7 in rubber tracks; conventional tail swing