Home › Head-to-head › Compact track loaders
Kubota SVL97-3 vs Caterpillar 299D3 XE
Published specs and dimensions of two compact track loaders side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Kubota SVL97-3 is 81 lb (37 kg) lighter, 1 in (30 mm) wider, 1 in (14 mm) lower and 1 in (30 mm) shorter than the Caterpillar 299D3 XE.
- Net power: 63.5 kW / 85.2 hp (Kubota SVL97-3) vs 79 kW / 106 hp (Caterpillar 299D3 XE); Caterpillar 299D3 XE is higher.
- Track length on ground: 1,666 mm / 5 ft 6 in (Kubota SVL97-3) vs 1,767 mm / 5 ft 10 in (Caterpillar 299D3 XE); Caterpillar 299D3 XE is higher.
- Shoe / track width: 450 mm / 17.7 in (Kubota SVL97-3) vs 400 mm / 15.7 in (Caterpillar 299D3 XE); Kubota SVL97-3 is higher.
- Ground clearance: 277 mm / 10.9 in (Kubota SVL97-3) vs 245 mm / 9.65 in (Caterpillar 299D3 XE); Kubota SVL97-3 is higher.
- Ground pressure: 32.4 kPa / 4.7 psi (Kubota SVL97-3) vs 37.3 kPa / 5.41 psi (Caterpillar 299D3 XE); Caterpillar 299D3 XE is higher.
- Displacement: 3.77 L / 230 cu in (Kubota SVL97-3) vs 3.8 L / 232 cu in (Caterpillar 299D3 XE); Caterpillar 299D3 XE is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Kubota SVL97-3 specs Caterpillar 299D3 XE specs Open in interactive compare Trailer fit: Kubota SVL97-3 Trailer fit: Caterpillar 299D3 XE
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Kubota SVL97-3 | Caterpillar 299D3 XE |
|---|---|---|
| Weights | ||
| Operating weight | ≈ 5,296 kg | 5,333 kg |
| Dimensions | ||
| Overall length | ≈ 3,901 mm | 3,931 mm |
| Overall width | ≈ 1,961 mm | 1,931 mm |
| Overall height | ≈ 2,111 mm | 2,125 mm |
| Track gauge / tread | ≈ 1,511 mm | Not published |
| Track length on ground | ≈ 1,666 mm | 1,767 mm |
| Shoe / track width | ≈ 450 mm | 400 mm |
| Ground clearance | ≈ 277 mm | 245 mm |
| Undercarriage / tires | ||
| Undercarriage type | Rubber tracks | Rubber tracks, torsion axle suspension |
| Track rollers / shoes per side | 5 track rollers per side | Not captured |
| Ground pressure | ||
| Ground pressure | ≈ 32.4 kPa | 37.3 kPa |
| Engine | ||
| Engine model | Kubota V3800-TIE5-L | Cat C3.8 DIT |
| Net power | ≈ 63.5 kW | 79 kW |
| Gross power | ≈ 71.9 kW | 82 kW |
| Displacement | ≈ 3.77 L | 3.8 L |
| Hydraulics | ||
| Pump / aux flow | ≈ 90.1 L/min | 86 L/min |
| System / relief pressure | ≈ 24.5 MPa | ≈ 23 MPa |
| Performance | ||
| Rated / lift capacity | ≈ 1,569 kg | 1,620 kg |
| Tipping load | ≈ 4,483 kg | 4,625 kg |
| Lift / hinge-pin height | ≈ 3,264 mm | 3,208 mm |
| Dump height / clearance | Not published | 2,399 mm |
| Breakout / digging force | ≈ 34 kN | ≈ 32.3 kN |
| Max travel speed | ≈ 13.5 km/h | 13.5 km/h |
Configurations.
Kubota SVL97-3: Open cab (ROPS), standard 17.7 in tracks; current successor to SVL97-2
Caterpillar 299D3 XE: Two-speed, ride control, enclosed cab with A/C, 2036 mm low-profile bucket, 400 mm rubber tracks, triple-flange idlers, no optional counterweights, manual quick coupler, 75 kg operator.