Home › Head-to-head › Skid steers
Kubota SSV75 vs Caterpillar 262D3
Published specs and dimensions of two skid steers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Kubota SSV75 is 139 lb (63 kg) lighter, 9 in (229 mm) wider, 2 in (45 mm) lower and 2 in (54 mm) shorter than the Caterpillar 262D3.
- Gross power: 53.4 kW / 71.6 hp (Kubota SSV75) vs 55.4 kW / 74.3 hp (Caterpillar 262D3); Caterpillar 262D3 is higher.
- Wheelbase: 1,199 mm / 3 ft 11 in (Kubota SSV75) vs 1,249 mm / 4 ft 1 in (Caterpillar 262D3); Caterpillar 262D3 is higher.
- Ground clearance: 206 mm / 8.1 in (Kubota SSV75) vs 226 mm / 8.9 in (Caterpillar 262D3); Caterpillar 262D3 is higher.
- Displacement: 3.33 L / 203.3 cu in (Kubota SSV75) vs 3.3 L / 201 cu in (Caterpillar 262D3); Kubota SSV75 is higher.
- Pump / aux flow: 79.1 L/min / 20.9 gpm (Kubota SSV75) vs 86 L/min / 22.7 gpm (Caterpillar 262D3); Caterpillar 262D3 is higher.
- System / relief pressure: 22.6 MPa / 3,271 psi (Kubota SSV75) vs 23 MPa / 3,336 psi (Caterpillar 262D3); Caterpillar 262D3 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Kubota SSV75 specs Caterpillar 262D3 specs Open in interactive compare Trailer fit: Kubota SSV75 Trailer fit: Caterpillar 262D3
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Kubota SSV75 | Caterpillar 262D3 |
|---|---|---|
| Weights | ||
| Operating weight | ≈ 3,700 kg | 3,763 kg |
| Dimensions | ||
| Overall length | ≈ 3,660 mm | 3,714 mm |
| Overall width | ≈ 1,905 mm | 1,676 mm |
| Overall height | ≈ 2,065 mm | 2,110 mm |
| Wheelbase | ≈ 1,199 mm | 1,249 mm |
| Track gauge / tread | Not captured | Not published |
| Ground clearance | ≈ 206 mm | 226 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, skid-steer | Wheeled, skid steer |
| Number of axles | 2 | 2 |
| Wheels (count) | 4 | 4 |
| Tire size | 12×16.5 10PR | Cat PC 12 x 16.5 |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not published | Not published |
| Axle load, rear (unladen/operating) | Not published | Not published |
| Engine | ||
| Engine model | Kubota V3307-CR-TE4 | Cat C3.3B (turbo) |
| Gross power | ≈ 53.4 kW | 55.4 kW |
| Displacement | ≈ 3.33 L | 3.3 L |
| Rated speed | 2,600 rpm | Not captured |
| Hydraulics | ||
| Pump / aux flow | ≈ 79.1 L/min | 86 L/min |
| System / relief pressure | ≈ 22.6 MPa | ≈ 23 MPa |
| Performance | ||
| Rated / lift capacity | ≈ 1,220 kg | 1,225 kg |
| Tipping load | ≈ 2,440 kg | 2,455 kg |
| Lift / hinge-pin height | ≈ 3,145 mm | 3,172 mm |
| Breakout / digging force | ≈ 26.2 kN | ≈ 32.7 kN |
| Max travel speed | ≈ 19 km/h | 12.5 km/h |
Configurations.
Kubota SSV75: Open cab (ROPS), 12×16.5 10PR tires
Caterpillar 262D3: One-speed, standard-flow hydraulics, OROPS, 1730 mm (68 in) low-profile bucket, Cat PC 12x16.5 tires, no optional counterweight (doc baseline).