Home › Head-to-head › Telehandlers
JLG 1255 vs Genie GTH-1256
Published specs and dimensions of two telehandlers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The JLG 1255 is 1,032 lb (468 kg) lighter, 1 in (32 mm) narrower, 4 in (102 mm) lower and 2 ft 7 in (792 mm) shorter than the Genie GTH-1256.
- Gross power: 94.7 kW / 127 hp (JLG 1255) vs 90.2 kW / 121 hp (Genie GTH-1256); JLG 1255 is higher.
- Wheelbase: 3,493 mm / 11 ft 6 in (JLG 1255) vs 3,505 mm / 11 ft 6 in (Genie GTH-1256); Genie GTH-1256 is higher.
- Ground clearance: 457 mm / 18 in (JLG 1255) vs 381 mm / 15 in (Genie GTH-1256); JLG 1255 is higher.
- Turning radius: 4,267 mm / 14 ft 0 in (JLG 1255) vs 4,343 mm / 14 ft 3 in (Genie GTH-1256); Genie GTH-1256 is higher.
- Pump / aux flow: 94.6 L/min / 25 gpm (JLG 1255) vs 56.8 L/min / 15 gpm (Genie GTH-1256); JLG 1255 is higher.
- Max travel speed: 32.2 km/h / 20 mph (JLG 1255) vs 27.4 km/h / 17 mph (Genie GTH-1256); JLG 1255 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
JLG 1255 specs Genie GTH-1256 specs Open in interactive compare Trailer fit: JLG 1255 Trailer fit: Genie GTH-1256
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | JLG 1255 | Genie GTH-1256 |
|---|---|---|
| Weights | ||
| Operating weight | ≈ 15,181 kg | ≈ 15,649 kg |
| Max gross (laden) weight | ≈ 22,687 kg | Not published |
| Dimensions | ||
| Overall length | ≈ 6,116 mm | ≈ 6,909 mm |
| Overall width | ≈ 2,559 mm | ≈ 2,591 mm |
| Overall height | ≈ 2,540 mm | ≈ 2,642 mm |
| Wheelbase | ≈ 3,493 mm | ≈ 3,505 mm |
| Track gauge / tread | Not published | Not published |
| Ground clearance | ≈ 457 mm | ≈ 381 mm |
| Turning radius | ≈ 4,267 mm | ≈ 4,343 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, 4WD / 4WS | Wheeled, 4WD / 4WS |
| Number of axles | 2 | 2 |
| Wheels (count) | 4 | 4 |
| Tire size | 400/75-28 | Genie Enduro A/T 400/75-28 |
| Ground pressure | ||
| Max tire ground bearing pressure (floor loading) | ≈ 1,710 kPa ⚠ Tire ground bearing pressure (one tire, max-laden axle) from a floor-loading sheet. Not comparable to the average ground pressure of tracked machines. | Not published |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not published | Not published |
| Axle load, rear (unladen/operating) | Not published | Not published |
| Axle load, front (laden/max) | Not published | Not published |
| Axle load, rear (laden/max) | Not published | Not published |
| Engine | ||
| Engine model | Deutz TCD 3.6L L4 | Deutz TCD 3.6 |
| Net power | Not published | Not published |
| Gross power | ≈ 94.7 kW | ≈ 90.2 kW ⚠ The manufacturer does not state the rating standard (gross or net). Filed as gross power; compare with care. |
| Displacement | ≈ 3.61 L | Not published |
| Hydraulics | ||
| Pump / aux flow | ≈ 94.6 L/min | ≈ 56.8 L/min |
| System / relief pressure | Not published | ≈ 22.1 MPa |
| Performance | ||
| Max travel speed | ≈ 32.2 km/h | ≈ 27.4 km/h |
| Rated / lift capacity | ≈ 5,443 kg | ≈ 5,443 kg |
| Lift / hinge-pin height | ≈ 16,764 mm | ≈ 17,145 mm |
| Max forward reach | ≈ 12,802 mm | ≈ 12,802 mm |
Configurations.
JLG 1255: Standard specification, 400/75-28 tires, 4-speed powershift, Deutz TCD 3.6L
Genie GTH-1256: Standard, Genie Enduro A/T 400/75-28 tires, 121 hp Deutz TCD 3.6 T4f, 4-speed powershift, stabilizers