Home › Head-to-head › Telehandlers
JLG 1055 vs Genie GTH-1056
Published specs and dimensions of two telehandlers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The JLG 1055 is 158 lb (72 kg) lighter, 1 in (32 mm) narrower, 2 in (51 mm) lower and 2 ft 5 in (742 mm) shorter than the Genie GTH-1056.
- Wheelbase: 3,493 mm / 11 ft 6 in (JLG 1055) vs 3,505 mm / 11 ft 6 in (Genie GTH-1056); Genie GTH-1056 is higher.
- Ground clearance: 457 mm / 18 in (JLG 1055) vs 381 mm / 15 in (Genie GTH-1056); JLG 1055 is higher.
- Pump / aux flow: 94.6 L/min / 25 gpm (JLG 1055) vs 56.8 L/min / 15 gpm (Genie GTH-1056); JLG 1055 is higher.
- Max travel speed: 32.2 km/h / 20 mph (JLG 1055) vs 29 km/h / 18 mph (Genie GTH-1056); JLG 1055 is higher.
- Lift / hinge-pin height: 16,764 mm / 55 ft 0 in (JLG 1055) vs 17,247 mm / 56 ft 7 in (Genie GTH-1056); Genie GTH-1056 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
JLG 1055 specs Genie GTH-1056 specs Open in interactive compare Trailer fit: JLG 1055 Trailer fit: Genie GTH-1056
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | JLG 1055 | Genie GTH-1056 |
|---|---|---|
| Weights | ||
| Operating weight | ≈ 14,398 kg | ≈ 14,470 kg |
| Max gross (laden) weight | ≈ 20,561 kg | Not published |
| Dimensions | ||
| Overall length | ≈ 6,116 mm | ≈ 6,858 mm |
| Overall width | ≈ 2,559 mm | ≈ 2,591 mm |
| Overall height | ≈ 2,540 mm | ≈ 2,591 mm |
| Wheelbase | ≈ 3,493 mm | ≈ 3,505 mm |
| Track gauge / tread | Not published | Not published |
| Ground clearance | ≈ 457 mm | ≈ 381 mm |
| Turning radius | ≈ 4,267 mm | ≈ 4,267 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, 4WD / 4WS | Wheeled, 4WD / 3-mode steering |
| Number of axles | 2 | 2 |
| Wheels (count) | 4 | 4 |
| Tire size | 400/75-28 | 400/75-28 |
| Ground pressure | ||
| Max tire ground bearing pressure (floor loading) | ≈ 1,655 kPa ⚠ Tire ground bearing pressure (one tire, max-laden axle) from a floor-loading sheet. Not comparable to the average ground pressure of tracked machines. | Not published |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not published | Not published |
| Axle load, rear (unladen/operating) | Not published | Not published |
| Axle load, front (laden/max) | Not published | Not published |
| Axle load, rear (laden/max) | Not published | Not published |
| Engine | ||
| Engine model | Deutz TCD 3.6L L4 | Deutz TCD 3.6 (74 hp or 121 hp) |
| Net power | Not published | Not published |
| Gross power | ≈ 94.7 kW | Not captured |
| Displacement | 3.6 L | Not published |
| Hydraulics | ||
| Pump / aux flow | ≈ 94.6 L/min | ≈ 56.8 L/min |
| System / relief pressure | Not published | ≈ 21.9 MPa |
| Performance | ||
| Max travel speed | ≈ 32.2 km/h | ≈ 29 km/h |
| Rated / lift capacity | ≈ 4,536 kg | ≈ 4,536 kg |
| Lift / hinge-pin height | ≈ 16,764 mm | ≈ 17,247 mm |
| Max forward reach | ≈ 12,802 mm | ≈ 12,802 mm |
Configurations.
JLG 1055: Standard specification, 400/75-28 tires, 4-speed powershift
Genie GTH-1056: Standard, Enduro A/T 400/75-28 tires; 74 hp or 121 hp Deutz option