Home › Head-to-head › Mid excavators
Hitachi ZX210LC-7H vs Case CX220E
Published specs and dimensions of two mid excavators side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Hitachi ZX210LC-7H is 882 lb (400 kg) heavier, 2 in (50 mm) taller and 8 in (200 mm) longer than the Case CX220E.
Both list the same overall width.
- Net power: 122 kW / 164 hp (Hitachi ZX210LC-7H) vs 120.4 kW / 161 hp (Case CX220E); Hitachi ZX210LC-7H is higher.
- Track length (overall): 4,450 mm / 14 ft 7 in (Hitachi ZX210LC-7H) vs 4,470 mm / 14 ft 8 in (Case CX220E); Case CX220E is higher.
- Ground clearance: 450 mm / 17.7 in (Hitachi ZX210LC-7H) vs 440 mm / 17.3 in (Case CX220E); Hitachi ZX210LC-7H is higher.
- Tail swing radius: 2,910 mm / 9 ft 7 in (Hitachi ZX210LC-7H) vs 2,830 mm / 9 ft 3 in (Case CX220E); Hitachi ZX210LC-7H is higher.
- Ground pressure: 36 kPa / 5.22 psi (Hitachi ZX210LC-7H) vs 35 kPa / 5.08 psi (Case CX220E); Hitachi ZX210LC-7H is higher.
- Displacement: 5.193 L / 317 cu in (Hitachi ZX210LC-7H) vs 6.728 L / 411 cu in (Case CX220E); Case CX220E is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Hitachi ZX210LC-7H specs Case CX220E specs Open in interactive compare Trailer fit: Hitachi ZX210LC-7H Trailer fit: Case CX220E
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Hitachi ZX210LC-7H | Case CX220E |
|---|---|---|
| Weights | ||
| Operating weight | 23,100 kg | 22,700 kg |
| Dimensions | ||
| Overall length | 9,670 mm | 9,470 mm |
| Overall width | 3,190 mm | 3,190 mm |
| Overall height | 3,030 mm | 2,980 mm |
| Transport height | 2,960 mm | Not captured |
| Track gauge / tread | 2,390 mm | 2,390 mm |
| Track length on ground | 3,660 mm | Not published |
| Track length (overall) | 4,450 mm | 4,470 mm |
| Shoe / track width | 800 mm | 800 mm |
| Ground clearance | 450 mm | 440 mm |
| Tail swing radius | 2,910 mm | 2,830 mm |
| Undercarriage / tires | ||
| Undercarriage type | Crawler (steel tracks) | Steel track |
| Track rollers / shoes per side | 8 track rollers, 2 carrier rollers, 49 shoes per side | 8 |
| Ground pressure | ||
| Ground pressure | 36 kPa | 35 kPa |
| Engine | ||
| Engine model | Isuzu 4HK1 | FPT NEF6 |
| Net power | 122 kW | 120.4 kW |
| Gross power | 128.4 kW | Not captured |
| Displacement | 5.193 L | 6.728 L |
| Rated speed | 2,000 rpm | Not captured |
| Hydraulics | ||
| Pump / aux flow | 424 L/min | 422 L/min |
| System / relief pressure | 34.3 MPa | ≈ 34.3 MPa |
| Performance | ||
| Max digging depth | 6,670 mm | 6,640 mm |
| Max reach (at ground) | 9,750 mm | 9,730 mm |
| Dump height / clearance | 7,180 mm | 6,810 mm |
| Breakout / digging force | 158 kN | ≈ 142 kN |
| Max travel speed | 5.5 km/h | 5.6 km/h |
Configurations.
Hitachi ZX210LC-7H: Monoblock boom, 2.91 m arm, 800 mm triple-grouser shoes, 0.80 m³ bucket, 4,850 kg counterweight; EPA Final Tier 4
Case CX220E: 5.70 m boom, 2.94 m standard arm, 650 kg bucket, 800 mm triple semi-grouser shoes, 75 kg operator, full fuel; FPT NEF6 Tier 4 Final/Stage V.