Home › Head-to-head › Motor graders
John Deere 872GP vs Caterpillar 150
Published specs and dimensions of two motor graders side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The John Deere 872GP is 1,519 lb (689 kg) heavier, 5 in (129 mm) wider, 5 in (128 mm) lower and 1 in (22 mm) shorter than the Caterpillar 150.
- Net power: 183 kW / 245 hp (John Deere 872GP) vs 149 kW / 200 hp (Caterpillar 150); John Deere 872GP is higher.
- Wheelbase: 6,160 mm / 20 ft 3 in (John Deere 872GP) vs 6,123 mm / 20 ft 1 in (Caterpillar 150); John Deere 872GP is higher.
- Track gauge / tread: 2,160 mm / 7 ft 1 in (John Deere 872GP) vs 2,140 mm / 7 ft 0 in (Caterpillar 150); John Deere 872GP is higher.
- Ground clearance: 587 mm / 23.1 in (John Deere 872GP) vs 339 mm / 13.3 in (Caterpillar 150); John Deere 872GP is higher.
- Turning radius: 7,210 mm / 23 ft 8 in (John Deere 872GP) vs 7,800 mm / 25 ft 7 in (Caterpillar 150); Caterpillar 150 is higher.
- Axle load, front (unladen/operating): 5,110 kg / 11,266 lb (John Deere 872GP) vs 4,355 kg / 9,601 lb (Caterpillar 150); John Deere 872GP is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
John Deere 872GP specs Caterpillar 150 specs Open in interactive compare Trailer fit: John Deere 872GP Trailer fit: Caterpillar 150
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | John Deere 872GP | Caterpillar 150 |
|---|---|---|
| Weights | ||
| Operating weight | 18,012 kg | 17,323 kg |
| Max gross (laden) weight | 24,948 kg | 25,013 kg |
| Dimensions | ||
| Overall length | ≈ 8,890 mm | 8,912 mm |
| Overall width | ≈ 2,640 mm | 2,511 mm |
| Overall height | ≈ 3,180 mm | 3,308 mm |
| Wheelbase | ≈ 6,160 mm | 6,123 mm |
| Track gauge / tread | ≈ 2,160 mm | 2,140 mm |
| Ground clearance | 587 mm | 339 mm |
| Turning radius | ≈ 7,210 mm | ≈ 7,800 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, articulated, tandem rear, 6WD (hydrostatic front-wheel assist) | Wheeled, articulated frame, tandem rear |
| Number of axles | 3 | 3 |
| Wheels (count) | 6 | 6 |
| Tire size | 17.5R25 L2 on 356 mm rim | 14.0R24 |
| Ground pressure | ||
| Ground pressure | Not published | Not published |
| Axle loads | ||
| Axle load, front (unladen/operating) | 5,110 kg | 4,355 kg |
| Axle load, rear (unladen/operating) | 12,902 kg | 12,968 kg |
| Axle load, front (laden/max) | Not published | 7,745 kg |
| Axle load, rear (laden/max) | Not published | 17,268 kg |
| Engine | ||
| Engine model | John Deere PowerTech PSS 9.0L | Cat C9.3 |
| Net power | 183 kW | 149 kW |
| Displacement | 9 L | 9.3 L |
| Rated speed | Not published | 2,000 rpm |
| Hydraulics | ||
| Pump / aux flow | 218 L/min | 210 L/min |
| System / relief pressure | ≈ 19 MPa | ≈ 24.2 MPa |
| Performance | ||
| Max travel speed | 45 km/h | 46.6 km/h |
| Blade / moldboard width | ≈ 4,270 mm | ≈ 3,700 mm |
Configurations.
John Deere 872GP: 872G/GP 6WD (Grade Pro), EPA Final Tier 4/EU Stage V, 4.27 m x 686 mm x 25 mm moldboard, 17.5R25 L2 tires on 356 mm rims, low-profile cab. 872G and 872GP share one spec sheet.
Caterpillar 150: Standard (non-AWD) 150, 3.7 m moldboard, 14.0R24 tires on multipiece rims, base configuration; Cat C9.3, U.S. EPA Tier 4 Final/EU Stage V.