Home › Head-to-head › Articulated dump trucks
John Deere 410 P-Tier vs Komatsu HM400-5
Published specs and dimensions of two articulated dump trucks side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The John Deere 410 P-Tier is 8,058 lb (3,655 kg) lighter, 2 in (40 mm) narrower, 5 mm (under 1 in) taller and 1 ft 6 in (465 mm) shorter than the Komatsu HM400-5.
- Net power: 329 kW / 441 hp (John Deere 410 P-Tier) vs 348 kW / 467 hp (Komatsu HM400-5); Komatsu HM400-5 is higher.
- Track gauge / tread: 2,660 mm / 8 ft 9 in (John Deere 410 P-Tier) vs 2,690 mm / 8 ft 10 in (Komatsu HM400-5); Komatsu HM400-5 is higher.
- Ground clearance: 540 mm / 21.3 in (John Deere 410 P-Tier) vs 710 mm / 28 in (Komatsu HM400-5); Komatsu HM400-5 is higher.
- Turning radius: 8,900 mm / 29 ft 2 in (John Deere 410 P-Tier) vs 8,885 mm / 29 ft 2 in (Komatsu HM400-5); John Deere 410 P-Tier is higher.
- Displacement: 13.5 L / 824 cu in (John Deere 410 P-Tier) vs 15.24 L / 930 cu in (Komatsu HM400-5); Komatsu HM400-5 is higher.
- Max travel speed: 55 km/h / 34.2 mph (John Deere 410 P-Tier) vs 55.9 km/h / 34.7 mph (Komatsu HM400-5); Komatsu HM400-5 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
John Deere 410 P-Tier specs Komatsu HM400-5 specs Open in interactive compare Trailer fit: John Deere 410 P-Tier Trailer fit: Komatsu HM400-5
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | John Deere 410 P-Tier | Komatsu HM400-5 |
|---|---|---|
| Weights | ||
| Operating weight | 31,400 kg | 35,055 kg |
| Max gross (laden) weight | 68,666 kg | 75,135 kg |
| Dimensions | ||
| Overall length | ≈ 10,640 mm | 11,105 mm |
| Overall width | ≈ 3,410 mm | 3,450 mm |
| Overall height | ≈ 3,850 mm | 3,845 mm |
| Wheelbase | Not published | 4,350 mm |
| Track gauge / tread | ≈ 2,660 mm | 2,690 mm |
| Ground clearance | ≈ 540 mm | 710 mm |
| Turning radius | ≈ 8,900 mm | 8,885 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, articulated, 6x6 | Wheeled, articulated (6 x 6) |
| Number of axles | 3 | 3 |
| Wheels (count) | 6 | 6 |
| Tire size | 29.5R25 radial earthmover | 29.5R25 |
| Ground pressure | ||
| Ground pressure | Not published | Not published |
| Ground pressure, loaded (highest axle) | Not published | Not published |
| Axle loads | ||
| Axle load, front (unladen/operating) | 17,082 kg | Not published |
| Axle load, rear (unladen/operating) | 7,159 kg | Not published |
| Axle load, front (laden/max) | 22,863 kg | Not published |
| Axle load, rear (laden/max) | 22,902 kg | Not published |
| Engine | ||
| Engine model | John Deere PowerTech 6135 | Komatsu SAA6D140E-7 |
| Net power | 329 kW | 348 kW |
| Gross power | Not captured | 353 kW |
| Displacement | 13.5 L | 15.24 L |
| Rated speed | Not published | 2,000 rpm |
| Hydraulics | ||
| Pump / aux flow | Not published | Not published |
| System / relief pressure | Not published | 28.4 MPa |
| Performance | ||
| Max travel speed | 55 km/h | 55.9 km/h |
| Rated payload | 37,266 kg | 40,000 kg |
| Body capacity (heaped) | 22.9 m³ | 24 m³ |
Configurations.
John Deere 410 P-Tier: Standard equipment, ROPS cab, 29.5R25 radial earthmover tires, no tailgate or liner; EPA Final Tier 4/EU Stage IV.
Komatsu HM400-5: Standard 24 m³ (SAE 2:1 heaped) body, 29.5R25 tires; EPA Tier 4 Final