Home › Head-to-head › Skid steers
John Deere 330 P-Tier vs Case SV340B
Published specs and dimensions of two skid steers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The John Deere 330 P-Tier is 820 lb (372 kg) heavier, 4 in (110 mm) wider, 6 in (150 mm) taller and 1 ft 1 in (340 mm) longer than the Case SV340B.
- Gross power: 73 kW / 97.9 hp (John Deere 330 P-Tier) vs 67 kW / 89.8 hp (Case SV340B); John Deere 330 P-Tier is higher.
- Wheelbase: 1,270 mm / 4 ft 2 in (John Deere 330 P-Tier) vs 1,320 mm / 4 ft 4 in (Case SV340B); Case SV340B is higher.
- Ground clearance: 250 mm / 9.84 in (John Deere 330 P-Tier) vs 240 mm / 9.45 in (Case SV340B); John Deere 330 P-Tier is higher.
- Displacement: 3.1 L / 189 cu in (John Deere 330 P-Tier) vs 3.4 L / 207 cu in (Case SV340B); Case SV340B is higher.
- Pump / aux flow: 94.6 L/min / 25 gpm (John Deere 330 P-Tier) vs 91.5 L/min / 24.2 gpm (Case SV340B); John Deere 330 P-Tier is higher.
- System / relief pressure: 23.8 MPa / 3,450 psi (John Deere 330 P-Tier) vs 23.8 MPa / 3,452 psi (Case SV340B); Case SV340B is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
John Deere 330 P-Tier specs Case SV340B specs Open in interactive compare Trailer fit: John Deere 330 P-Tier Trailer fit: Case SV340B
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | John Deere 330 P-Tier | Case SV340B |
|---|---|---|
| Weights | ||
| Operating weight | 4,508 kg | 4,136 kg |
| Dimensions | ||
| Overall length | ≈ 4,010 mm | ≈ 3,670 mm |
| Overall width | ≈ 1,990 mm | ≈ 1,880 mm |
| Overall height | ≈ 2,190 mm | ≈ 2,040 mm |
| Wheelbase | ≈ 1,270 mm | ≈ 1,320 mm |
| Track gauge / tread | Not published | ≈ 1,530 mm |
| Ground clearance | ≈ 250 mm | ≈ 240 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, skid steer | Wheeled, skid steer |
| Number of axles | 2 | 2 |
| Wheels (count) | 4 | 4 |
| Tire size | 14 x 17.5 14 PR Titan HD2000-II | 14 × 17.5 |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not published | Not published |
| Axle load, rear (unladen/operating) | Not published | Not published |
| Engine | ||
| Engine model | Yanmar 4TNV94FHT | FPT F5BFL413D |
| Net power | 70.8 kW | Not captured |
| Gross power | 73 kW | 67 kW |
| Displacement | 3.1 L | 3.4 L |
| Rated speed | 2,500 rpm | Not captured |
| Hydraulics | ||
| Pump / aux flow | 94.6 L/min | 91.5 L/min |
| System / relief pressure | ≈ 23.8 MPa | ≈ 23.8 MPa |
| Performance | ||
| Rated / lift capacity | 1,339 kg | 1,545 kg |
| Tipping load | 2,679 kg | 3,090 kg |
| Lift / hinge-pin height | ≈ 3,360 mm | ≈ 3,340 mm |
| Breakout / digging force | ≈ 32.9 kN | ≈ 42.4 kN |
| Max travel speed | 20.1 km/h | 18.5 km/h |
Configurations.
John Deere 330 P-Tier: Base machine, vertical-lift boom, construction bucket, 14 x 17.5 14 PR Titan HD2000-II tires, standard-flow hydraulics, 2-speed; EPA Final Tier 4/EU Stage IV.
Case SV340B: Open cab, 78 in heavy-duty bucket, 14 × 17.5 tires, 2-speed, standard-flow auxiliary hydraulics, 165 lb operator, full fuel.