Home › Head-to-head › Skid steers
John Deere 320 P-Tier vs Caterpillar 246D3
Published specs and dimensions of two skid steers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The John Deere 320 P-Tier is 322 lb (146 kg) lighter, 4 in (94 mm) wider, 2 in (50 mm) lower and 10 in (248 mm) shorter than the Caterpillar 246D3.
- Net power: 49.4 kW / 66.2 hp (John Deere 320 P-Tier) vs 54.4 kW / 73 hp (Caterpillar 246D3); Caterpillar 246D3 is higher.
- Wheelbase: 1,120 mm / 3 ft 8 in (John Deere 320 P-Tier) vs 1,249 mm / 4 ft 1 in (Caterpillar 246D3); Caterpillar 246D3 is higher.
- Ground clearance: 210 mm / 8.27 in (John Deere 320 P-Tier) vs 226 mm / 8.9 in (Caterpillar 246D3); Caterpillar 246D3 is higher.
- Pump / aux flow: 78 L/min / 20.6 gpm (John Deere 320 P-Tier) vs 86 L/min / 22.7 gpm (Caterpillar 246D3); Caterpillar 246D3 is higher.
- System / relief pressure: 22.4 MPa / 3,250 psi (John Deere 320 P-Tier) vs 23 MPa / 3,336 psi (Caterpillar 246D3); Caterpillar 246D3 is higher.
- Rated / lift capacity: 994 kg / 2,191 lb (John Deere 320 P-Tier) vs 1,000 kg / 2,205 lb (Caterpillar 246D3); Caterpillar 246D3 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
John Deere 320 P-Tier specs Caterpillar 246D3 specs Open in interactive compare Trailer fit: John Deere 320 P-Tier Trailer fit: Caterpillar 246D3
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | John Deere 320 P-Tier | Caterpillar 246D3 |
|---|---|---|
| Weights | ||
| Operating weight | 3,246 kg | 3,392 kg |
| Dimensions | ||
| Overall length | ≈ 3,460 mm | 3,708 mm |
| Overall width | ≈ 1,770 mm | 1,676 mm |
| Overall height | ≈ 2,060 mm | 2,110 mm |
| Wheelbase | ≈ 1,120 mm | 1,249 mm |
| Track gauge / tread | Not published | Not published |
| Ground clearance | ≈ 210 mm | 226 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, skid-steer (chain drive) | Wheeled, skid-steer |
| Number of axles | 2 | 2 |
| Wheels (count) | 4 | 4 |
| Tire size | 12 x 16.5 12 PR | Cat PC 12 × 16.5 |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not published | Not published |
| Axle load, rear (unladen/operating) | Not published | Not published |
| Engine | ||
| Engine model | Yanmar 4TNV98C | Cat C3.3B DIT (turbo) |
| Net power | 49.4 kW | 54.4 kW |
| Gross power | 51.7 kW | 55.4 kW |
| Displacement | 3.3 L | 3.3 L |
| Rated speed | 2,500 rpm | Not published |
| Hydraulics | ||
| Pump / aux flow | 78 L/min | 86 L/min |
| System / relief pressure | ≈ 22.4 MPa | ≈ 23 MPa |
| Performance | ||
| Rated / lift capacity | 994 kg | 1,000 kg |
| Tipping load | 1,989 kg | 2,000 kg |
| Lift / hinge-pin height | ≈ 3,100 mm | 3,154 mm |
| Breakout / digging force | ≈ 26.7 kN | ≈ 32.7 kN |
| Max travel speed | 17.9 km/h | 12.5 km/h |
Configurations.
John Deere 320 P-Tier: Vertical-lift boom, base machine without attachment, 12 x 16.5 12 PR Camso SKS tires, standard-flow hydraulics, 2-speed, foundry bucket for dimensions; Yanmar 4TNV98C EPA Final Tier 4.
Caterpillar 246D3: One speed, OROPS, 1676 mm (68 in) low-profile bucket, Cat PC 12 × 16.5 tires, standard-flow hydraulics, no optional counterweights, 75 kg operator; Tier 4 Final/Stage V.