Home › Head-to-head › Backhoe loaders
John Deere 310 P-Tier vs Case 580SN
Published specs and dimensions of two backhoe loaders side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The John Deere 310 P-Tier is 4,529 lb (2,054 kg) lighter, 1 in (16 mm) wider, 4 in (92 mm) taller and 5 in (128 mm) longer than the Case 580SN.
- Net power: 75 kW / 101 hp (John Deere 310 P-Tier) vs 70.8 kW / 95 hp (Case 580SN); John Deere 310 P-Tier is higher.
- Wheelbase: 2,160 mm / 7 ft 1 in (John Deere 310 P-Tier) vs 2,146 mm / 7 ft 1 in (Case 580SN); John Deere 310 P-Tier is higher.
- Ground clearance: 293 mm / 11.5 in (John Deere 310 P-Tier) vs 381 mm / 15 in (Case 580SN); Case 580SN is higher.
- Turning radius: 3,430 mm / 11 ft 3 in (John Deere 310 P-Tier) vs 3,450 mm / 11 ft 4 in (Case 580SN); Case 580SN is higher.
- Displacement: 4.5 L / 275 cu in (John Deere 310 P-Tier) vs 3.4 L / 207 cu in (Case 580SN); John Deere 310 P-Tier is higher.
- Pump / aux flow: 106 L/min / 28 gpm (John Deere 310 P-Tier) vs 155 L/min / 41 gpm (Case 580SN); Case 580SN is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
John Deere 310 P-Tier specs Case 580SN specs Open in interactive compare Trailer fit: John Deere 310 P-Tier Trailer fit: Case 580SN
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | John Deere 310 P-Tier | Case 580SN |
|---|---|---|
| Weights | ||
| Operating weight | 6,904 kg | ≈ 8,958 kg |
| Dimensions | ||
| Overall length | ≈ 7,240 mm | ≈ 7,112 mm |
| Overall width | ≈ 2,200 mm | ≈ 2,184 mm |
| Overall height | ≈ 2,810 mm | ≈ 2,718 mm |
| Wheelbase | ≈ 2,160 mm | ≈ 2,146 mm |
| Track gauge / tread | Not published | ≈ 1,720 mm |
| Ground clearance | 293 mm | ≈ 381 mm |
| Turning radius | ≈ 3,430 mm | ≈ 3,450 mm |
| Transport height | ≈ 3,390 mm | ≈ 3,378 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, rigid frame, 2WD (MFWD optional) | Wheeled, 4WD |
| Number of axles | 2 | 2 |
| Wheels (count) | 4 | 4 |
| Tire size | Front 12.5/80-18 F3 (12), rear 19.5L-24 R4 (12) | 12×16.5 front / 19.5L-24 rear |
| Ground pressure | ||
| Ground pressure | Not published | Not published |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not published | Not published |
| Axle load, rear (unladen/operating) | Not published | Not published |
| Engine | ||
| Engine model | John Deere PowerTech EWL 4.5L turbocharged | FPT F5BFL413B |
| Net power | 75 kW | ≈ 70.8 kW |
| Gross power | Not captured | ≈ 72.3 kW |
| Displacement | 4.5 L | 3.4 L |
| Hydraulics | ||
| Pump / aux flow | 106 L/min | ≈ 155 L/min |
| System / relief pressure | ≈ 25 MPa | ≈ 21.4 MPa |
| Performance | ||
| Max travel speed | 36.6 km/h | 39.6 km/h |
| Max digging depth | ≈ 4,300 mm | ≈ 4,420 mm |
| Max reach (at ground) | ≈ 5,420 mm | ≈ 5,537 mm |
| Rated / lift capacity | 2,919 kg | ≈ 3,195 kg |
| Bucket capacity | 0.77 m³ | ≈ 0.76 m³ |
Configurations.
John Deere 310 P-Tier: Base machine: canopy, non-powered front axle (2WD), standard backhoe dipper, 0.77 m³ heavy-duty loader bucket, 12.5/80-18 front and 19.5L-24 rear tires; EPA Final Tier 4.
Case 580SN: 4WD, cab, extendahoe, 12×16.5 front / 19.5L-24 rear tires (Config 2); Tier 4 Final