Home › Head-to-head › Dozers
Caterpillar D5 vs John Deere 750 P-Tier
Published specs and dimensions of two dozers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Caterpillar D5 is 306 lb (139 kg) heavier, 1 in (24 mm) narrower, 6 in (163 mm) lower and 1 ft 2 in (359 mm) shorter than the John Deere 750 P-Tier.
- Net power: 127 kW / 170 hp (Caterpillar D5) vs 131 kW / 176 hp (John Deere 750 P-Tier); John Deere 750 P-Tier is higher.
- Track gauge / tread: 1,890 mm / 6 ft 2 in (Caterpillar D5) vs 1,880 mm / 6 ft 2 in (John Deere 750 P-Tier); Caterpillar D5 is higher.
- Track length on ground: 2,562 mm / 8 ft 5 in (Caterpillar D5) vs 3,093 mm / 10 ft 2 in (John Deere 750 P-Tier); John Deere 750 P-Tier is higher.
- Shoe / track width: 610 mm / 24 in (Caterpillar D5) vs 559 mm / 22 in (John Deere 750 P-Tier); Caterpillar D5 is higher.
- Ground pressure: 47.6 kPa / 6.9 psi (Caterpillar D5) vs 43.7 kPa / 6.34 psi (John Deere 750 P-Tier); Caterpillar D5 is higher.
- Displacement: 7.1 L / 433 cu in (Caterpillar D5) vs 6.8 L / 415 cu in (John Deere 750 P-Tier); Caterpillar D5 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Caterpillar D5 specs John Deere 750 P-Tier specs Open in interactive compare Trailer fit: Caterpillar D5 Trailer fit: John Deere 750 P-Tier
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Caterpillar D5 | John Deere 750 P-Tier |
|---|---|---|
| Weights | ||
| Operating weight | 17,180 kg | 17,041 kg |
| Shipping / tractor weight | 16,950 kg | Not published |
| Dimensions | ||
| Overall length | ≈ 5,000 mm | 5,359 mm |
| Overall width | 3,272 mm | 3,296 mm |
| Overall height | ≈ 3,085 mm | 3,248 mm |
| Track gauge / tread | ≈ 1,890 mm | 1,880 mm |
| Track length on ground | ≈ 2,562 mm | 3,093 mm |
| Shoe / track width | 610 mm | 559 mm |
| Ground clearance | 358 mm | 358 mm |
| Undercarriage / tires | ||
| Undercarriage type | Crawler (steel tracks) | Crawler (steel tracks) |
| Track rollers / shoes per side | 40 sections, 7 bottom rollers per side | 8 |
| Ground pressure | ||
| Ground pressure | 47.6 kPa | 43.7 kPa |
| Engine | ||
| Engine model | Cat C7.1 | John Deere PowerTech PVS 6068 |
| Net power | 127 kW | 131 kW |
| Gross power | 151 kW | Not published |
| Displacement | 7.1 L | 6.8 L |
| Rated speed | 1,770 rpm | 1,700 rpm |
| Hydraulics | ||
| Pump / aux flow | 127 L/min | 130 L/min |
| System / relief pressure | ≈ 25 MPa | ≈ 25 MPa |
| Performance | ||
| Blade capacity | 3.5 m³ | 3.9 m³ |
| Blade / moldboard width | 3,272 mm | 3,296 mm |
| Max travel speed | 9.8 km/h | 9.7 km/h |
Configurations.
Caterpillar D5: Build 17C, standard VPAT (variable pitch power angle tilt) blade, standard undercarriage, 610 mm shoes; Tier 4 Final/Stage V.
John Deere 750 P-Tier: XLT, Power-Angle-Tilt (PAT) straight blade 3296 mm, 559 mm grousers, ROPS; John Deere PowerTech PVS 6068 EPA Final Tier 4/EU Stage V.