Home › Head-to-head › Large excavators
Caterpillar 336 vs Komatsu PC360LC-11
Published specs and dimensions of two large excavators side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Caterpillar 336 is 642 lb (291 kg) heavier, 6 in (150 mm) wider, 1 ft 4 in (405 mm) taller and 1 in (35 mm) longer than the Komatsu PC360LC-11.
- Net power: 223.5 kW / 300 hp (Caterpillar 336) vs 192 kW / 257 hp (Komatsu PC360LC-11); Caterpillar 336 is higher.
- Track gauge / tread: 2,740 mm / 9 ft 0 in (Caterpillar 336) vs 2,590 mm / 8 ft 6 in (Komatsu PC360LC-11); Caterpillar 336 is higher.
- Track length on ground: 4,040 mm / 13 ft 3 in (Caterpillar 336) vs 4,030 mm / 13 ft 3 in (Komatsu PC360LC-11); Caterpillar 336 is higher.
- Track length (overall): 5,030 mm / 16 ft 6 in (Caterpillar 336) vs 4,955 mm / 16 ft 3 in (Komatsu PC360LC-11); Caterpillar 336 is higher.
- Ground clearance: 510 mm / 20.1 in (Caterpillar 336) vs 498 mm / 19.6 in (Komatsu PC360LC-11); Caterpillar 336 is higher.
- Tail swing radius: 3,530 mm / 11 ft 7 in (Caterpillar 336) vs 3,445 mm / 11 ft 4 in (Komatsu PC360LC-11); Caterpillar 336 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Caterpillar 336 specs Komatsu PC360LC-11 specs Open in interactive compare Trailer fit: Caterpillar 336 Trailer fit: Komatsu PC360LC-11
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Caterpillar 336 | Komatsu PC360LC-11 |
|---|---|---|
| Weights | ||
| Operating weight | 36,800 kg | 36,509 kg |
| Dimensions | ||
| Overall length | 11,180 mm | 11,145 mm |
| Overall width | 3,590 mm | 3,440 mm |
| Overall height | 3,660 mm | 3,255 mm |
| Transport height | Not captured | 3,285 mm |
| Track gauge / tread | 2,740 mm | 2,590 mm |
| Track length on ground | 4,040 mm | 4,030 mm |
| Track length (overall) | 5,030 mm | 4,955 mm |
| Shoe / track width | 850 mm | 850 mm |
| Ground clearance | 510 mm | 498 mm |
| Tail swing radius | 3,530 mm | 3,445 mm |
| Undercarriage / tires | ||
| Undercarriage type | Crawler (steel tracks), Long Wide | Crawler (steel tracks) |
| Track rollers / shoes per side | 8 track rollers, 2 carrier rollers, 49 shoes per side | 8 track rollers, 2 carrier rollers, 48 shoes per side |
| Ground pressure | ||
| Ground pressure | 48.4 kPa | ≈ 49 kPa |
| Engine | ||
| Engine model | Cat C7.1 TTA | Komatsu SAA6D114E-6 |
| Net power | 223.5 kW | 192 kW |
| Gross power | Not captured | 202 kW |
| Displacement | 7.01 L | 8.85 L |
| Rated speed | 2,000 rpm | 1,950 rpm |
| Hydraulics | ||
| Pump / aux flow | 560 L/min | 535 L/min |
| System / relief pressure | ≈ 35 MPa | 37.3 MPa |
| Performance | ||
| Max digging depth | 8,210 mm | 7,280 mm |
| Max reach (at ground) | 11,760 mm | 10,920 mm |
| Dump height / clearance | 7,470 mm | 7,110 mm |
| Breakout / digging force | 210 kN | 228 kN |
| Max travel speed | 4.7 km/h | 5.5 km/h |
Configurations.
Caterpillar 336: Build 08D, Tier 4 Final/Stage V. Long Wide undercarriage, 6.5 m Reach boom, R3.9DB (12'10") stick, 2.00 m³ HD bucket, 850 mm triple-grouser shoes, 6.8 t counterweight.
Komatsu PC360LC-11: PC360LC-11 (non-iMC), 850 mm triple-grouser shoes (standard), 6,500 mm HD one-piece boom, 3,185 mm arm, 1.96 m³ SAE heaped bucket; EPA Tier 4 Final