Home › Head-to-head › Compact track loaders
Case TV450B vs Caterpillar 289D3
Published specs and dimensions of two compact track loaders side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Case TV450B is 55 lb (25 kg) lighter, 2 in (41 mm) narrower, 3 in (73 mm) lower and 3 in (66 mm) longer than the Caterpillar 289D3.
- Net power: 63 kW / 84.5 hp (Case TV450B) vs 54.4 kW / 73 hp (Caterpillar 289D3); Case TV450B is higher.
- Track length on ground: 1,640 mm / 5 ft 5 in (Case TV450B) vs 1,630 mm / 5 ft 4 in (Caterpillar 289D3); Case TV450B is higher.
- Ground clearance: 240 mm / 9.45 in (Case TV450B) vs 226 mm / 8.9 in (Caterpillar 289D3); Case TV450B is higher.
- Ground pressure: 31.7 kPa / 4.6 psi (Case TV450B) vs 32.2 kPa / 4.67 psi (Caterpillar 289D3); Caterpillar 289D3 is higher.
- Displacement: 3.4 L / 207 cu in (Case TV450B) vs 3.3 L / 201 cu in (Caterpillar 289D3); Case TV450B is higher.
- Pump / aux flow: 91.5 L/min / 24.2 gpm (Case TV450B) vs 86 L/min / 22.7 gpm (Caterpillar 289D3); Case TV450B is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Case TV450B specs Caterpillar 289D3 specs Open in interactive compare Trailer fit: Case TV450B Trailer fit: Caterpillar 289D3
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Case TV450B | Caterpillar 289D3 |
|---|---|---|
| Weights | ||
| Operating weight | 4,823 kg | 4,848 kg |
| Dimensions | ||
| Overall length | ≈ 3,780 mm | 3,714 mm |
| Overall width | ≈ 1,940 mm | 1,981 mm |
| Overall height | ≈ 2,040 mm | 2,113 mm |
| Track gauge / tread | ≈ 1,490 mm | Not published |
| Track length on ground | ≈ 1,640 mm | 1,630 mm |
| Shoe / track width | 450 mm | 450 mm |
| Ground clearance | ≈ 240 mm | 226 mm |
| Undercarriage / tires | ||
| Undercarriage type | Rubber tracks | Rubber track, suspended undercarriage |
| Ground pressure | ||
| Ground pressure | 31.7 kPa | 32.2 kPa |
| Engine | ||
| Engine model | FPT F5BFL413D*C009 | Cat C3.3B DIT (turbo) |
| Net power | 63 kW | 54.4 kW |
| Gross power | 67 kW | 55.4 kW |
| Displacement | 3.4 L | 3.3 L |
| Hydraulics | ||
| Pump / aux flow | 91.5 L/min | 86 L/min |
| System / relief pressure | ≈ 23.8 MPa | ≈ 23 MPa |
| Performance | ||
| Rated / lift capacity | 2,045 kg | 1,315 kg |
| Tipping load | 4,091 kg | 3,750 kg |
| Lift / hinge-pin height | ≈ 3,340 mm | 3,178 mm |
| Dump height / clearance | ≈ 2,570 mm | 2,387 mm |
| Breakout / digging force | 41.8 kN | ≈ 32.4 kN |
| Max travel speed | 12.9 km/h | 13.3 km/h |
Configurations.
Case TV450B: Open cab (ROPS/FOPS canopy), 78 in heavy-duty bucket, 450 mm (17.7 in) rubber tracks, standard-flow hydraulics, 2-speed; Tier 4 Final.
Caterpillar 289D3: Two-speed, OROPS, 2036 mm (80 in) low-profile bucket, 450 mm steel-imbed rubber tracks, standard-flow hydraulics, no optional counterweights, 75 kg operator; Tier 4 Final/Stage V.