Home › Head-to-head › Skid steers
Bobcat S64-2 vs Case SR210B
Published specs and dimensions of two skid steers side by side. Every value comes from the manufacturer document cited on each model page; ≈ marks a unit conversion.
Key differences
The Bobcat S64-2 is 115 lb (52 kg) lighter, 4 in (114 mm) narrower, 2 in (46 mm) taller and 1 ft 11 in (574 mm) shorter than the Case SR210B.
- Gross power: 50.7 kW / 68 hp (Bobcat S64-2) vs 55.2 kW / 74 hp (Case SR210B); Case SR210B is higher.
- Wheelbase: 1,133 mm / 3 ft 9 in (Bobcat S64-2) vs 1,128 mm / 3 ft 8 in (Case SR210B); Bobcat S64-2 is higher.
- Pump / aux flow: 66.6 L/min / 17.6 gpm (Bobcat S64-2) vs 91.6 L/min / 24.2 gpm (Case SR210B); Case SR210B is higher.
- System / relief pressure: 24.1 MPa / 3,500 psi (Bobcat S64-2) vs 21 MPa / 3,050 psi (Case SR210B); Bobcat S64-2 is higher.
- Rated / lift capacity: 1,043 kg / 2,300 lb (Bobcat S64-2) vs 953 kg / 2,100 lb (Case SR210B); Bobcat S64-2 is higher.
- Tipping load: 2,087 kg / 4,600 lb (Bobcat S64-2) vs 1,905 kg / 4,200 lb (Case SR210B); Bobcat S64-2 is higher.
Computed from the published figures for each model's stated configuration (listed below the table). Options such as boom, bucket, tracks or tires change these numbers.
Bobcat S64-2 specs Case SR210B specs Open in interactive compare Trailer fit: Bobcat S64-2 Trailer fit: Case SR210B
Side-by-side specs
Use the Metric / Imperial switch at the top to change units. Highlighted rows differ.
| Spec | Bobcat S64-2 | Case SR210B |
|---|---|---|
| Weights | ||
| Operating weight | ≈ 3,109 kg | ≈ 3,162 kg |
| Dimensions | ||
| Overall length | ≈ 2,718 mm | ≈ 3,292 mm |
| Overall width | ≈ 1,641 mm | ≈ 1,755 mm |
| Overall height | ≈ 2,045 mm | ≈ 1,999 mm |
| Wheelbase | ≈ 1,133 mm | ≈ 1,128 mm |
| Track gauge / tread | Not captured | ≈ 1,445 mm |
| Ground clearance | Not captured | ≈ 203 mm |
| Undercarriage / tires | ||
| Undercarriage type | Wheeled, skid-steer | Wheeled, skid steer |
| Number of axles | Not captured | 2 |
| Wheels (count) | Not captured | 4 |
| Tire size | 254 X 419 [10 X 16.5] | 12 × 16.5 |
| Axle loads | ||
| Axle load, front (unladen/operating) | Not captured | Not published |
| Axle load, rear (unladen/operating) | Not captured | Not published |
| Engine | ||
| Engine model | Not published | F5HFL463A*G032 |
| Net power | Not published | ≈ 50.7 kW |
| Gross power | ≈ 50.7 kW ⚠ The manufacturer does not state the rating standard (gross or net). Filed as gross power; compare with care. | ≈ 55.2 kW |
| Displacement | Not captured | 3.4 L |
| Rated speed | Not captured | 2,500 rpm |
| Hydraulics | ||
| Pump / aux flow | ≈ 66.6 L/min | ≈ 91.6 L/min |
| System / relief pressure | ≈ 24.1 MPa | ≈ 21 MPa |
| Performance | ||
| Rated / lift capacity | ≈ 1,043 kg | ≈ 953 kg |
| Tipping load | ≈ 2,087 kg | ≈ 1,905 kg |
| Lift / hinge-pin height | ≈ 3,048 mm | ≈ 3,124 mm |
| Breakout / digging force | ≈ 24.4 kN | ≈ 32.3 kN |
| Max travel speed | ≈ 17.7 km/h | ≈ 16.9 km/h |
Configurations.
Bobcat S64-2: Pro S64-2 (R2-Series), cab, 2-speed, vertical lift; NA 2026 spec book
Case SR210B: Open ROPS/FOPS canopy, 165 lb operator, 72 in Dirt and Foundry bucket, full fuel, 12 × 16.5 tires, standard-flow auxiliary hydraulics; radial lift; emissions as printed: Tier 4 Final.