Yanmar ViO55-6A

Canopy, rubber tracks (5.38 t). Cab rubber 12,247 lb; canopy steel 11,916 lb; cab steel 12,313 lb.

Not stored. The drawing letter is ambiguous: E is 5,580 mm and could be either the transport length or the reach at ground level.

L, overall width.

J, height to top of cab/canopy.

Not published.

Not published on the spec sheet.

Not published on the spec sheet.

Not published on the spec sheet.

M.

N.

S, rear swing radius (R995); true zero tail swing.

Not published on the spec sheet.

Canopy, rubber tracks (28.8 kPa); cab 4.40 psi.

Water-cooled 4-cylinder diesel.

Gross/net standard not stated; the printed output is stored as power_gross.

Printed 'output' 47.6 hp (35.5 kW) / 2,400 rpm; gross/net standard not stated.

Not published on the spec sheet.

Printed 'Pump Capacity GPM (L / min) 12 + 12 + 9.7 + 2.8 (42.5 + 42.5 + 37 + 10.8)'; sum 36.5 gpm as printed (L/min parts sum to 132.8 L/min; note the sheet's 12 gpm pairs with 42.5 L/min, which is 11.2 gpm). Sheet markets a '3-PUMP HYDRAULIC' system while listing four flows. Batch-8 correction: earlier batch stored one pump; per README pump-flow convention the sum of all pumps printed under the sheet's pump-capacity line is stored. The sheet does not label any pump as a separate steering/brake/fan/pilot circuit, so none is excluded; the smallest gear pump may serve pilot/swing functions (not stated).

Main relief 3,553 psi x 3 + 566 psi (24.5 MPa x 3 + 3.9 MPa).

Quick specs 'Max Dig Depth 13'6"', which matches drawing letter B (4,120 mm). Letter A is 3,900 mm; C, vertical wall depth, is 2,560 mm.

Not stored. Drawing letters D (6,140 mm) and E (5,580 mm) are ambiguous.

H, max dump height. G, max dig height, is 6,060 mm.

Bucket, without quick coupler (41.9 kN). Arm 5,485 lbf (24.4 kN).

High (4.2 km/h); low 1.4 mph (2.2 km/h).