Linde H35 D/T (1202)
Configuration: Series 1202, 7,000 lb at 24 in load centre, Deutz 3-cylinder diesel or LP engine (2,194 cc), SE (solid pneumatic) tires, standard mast. Engine output row is printed garbled on the sheet (H25 '40 / 30 | 48 / 36'; H30/H35 '60 / 45 | 53 / 40', hp/kW pairs for diesel vs LP not separable); power omitted.
23 sourced values · Sources: Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25
Dimension diagram
| A | Overall length | ≈ 2,794 mm |
| B | Overall height | ≈ 2,322 mm |
| C | Wheelbase | ≈ 1,963 mm |
| D | Ground clearance | ≈ 175 mm |
| E | Overall width | ≈ 1,255 mm |
| F | Track gauge / tread | ≈ 1,006 mm |
Weights
| Spec | Value | Source |
|---|---|---|
| Operating weight | 4,978 kg | Published: 4,978 kg Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Service weight; the lb column prints 9,303 lb, which conflicts with the printed unladen axle loads (5,046 + 5,928 = 10,974 lb ≈ 4,978 kg), so the kg value is stored. |
Dimensions
Undercarriage / tires
Ground pressure
| Spec | Value | Source |
|---|---|---|
| Ground pressure | Not published | Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25 Not published on the spec sheet. |
Axle loads
Engine
Hydraulics
| Spec | Value | Source |
|---|---|---|
| Pump / aux flow | ≈ 50 L/min | Published: 13.2 gpm Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Max. hydraulic oil flow (50 L/min). |
| System / relief pressure | ≈ 24.5 MPa | Published: 3,553 psi Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Max. hydraulic operating pressure, 245 bar. |
Performance
| Spec | Value | Source |
|---|---|---|
| Max travel speed | ≈ 21.9 km/h | Published: 13.6 mph Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Travel speed laden and empty (22 km/h). |
| Rated / lift capacity | ≈ 3,175 kg | Published: 7,000 lb Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Q, rated capacity; load centre printed 24 in (metric column 500 mm). |
| Lift / hinge-pin height | Not published | Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25 Mast table columns not clearly attributable in the PDF text; omitted rather than guessed. |
Similar models
| Brand | Model | Operating weight |
|---|---|---|
| Hyster | H70A | ≈ 4,881 kg |
| Komatsu | FG32SHT-16 | ≈ 4,500 kg |
| Hyster | H60A | ≈ 4,454 kg |
| Komatsu | FG32HT-16 | ≈ 4,445 kg |
| Crown | C5 1055-50 | ≈ 4,407 kg |
| Komatsu | FG40ZTU-10 | ≈ 5,673 kg |
Compare side by side with Hyster H70A and Komatsu FG32SHT-16