Linde H25 D/T (1202)
Configuration: Series 1202, 5,000 lb at 24 in load centre, Deutz 3-cylinder diesel or LP engine (2,194 cc), SE (solid pneumatic) tires, standard mast. Engine output row is printed garbled on the sheet (H25 '40 / 30 | 48 / 36'; H30/H35 '60 / 45 | 53 / 40', hp/kW pairs for diesel vs LP not separable); power omitted.
23 sourced values · Sources: Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25
Dimension diagram
| A | Overall length | ≈ 2,697 mm |
| B | Overall height | ≈ 2,273 mm |
| C | Wheelbase | ≈ 1,905 mm |
| D | Ground clearance | ≈ 130 mm |
| E | Overall width | ≈ 1,179 mm |
| F | Track gauge / tread | ≈ 970 mm |
Weights
| Spec | Value | Source |
|---|---|---|
| Operating weight | ≈ 3,918 kg | Published: 8,637 lb Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Service weight. |
Dimensions
Undercarriage / tires
Ground pressure
| Spec | Value | Source |
|---|---|---|
| Ground pressure | Not published | Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25 Not published on the spec sheet. |
Axle loads
Engine
Hydraulics
| Spec | Value | Source |
|---|---|---|
| Pump / aux flow | ≈ 50 L/min | Published: 13.2 gpm Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Max. hydraulic oil flow (50 L/min). |
| System / relief pressure | ≈ 23 MPa | Published: 3,335 psi Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Max. hydraulic operating pressure, 230 bar. |
Performance
| Spec | Value | Source |
|---|---|---|
| Max travel speed | ≈ 21.9 km/h | Published: 13.6 mph Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Travel speed laden and empty (22 km/h). |
| Rated / lift capacity | ≈ 2,268 kg | Published: 5,000 lb Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25Q, rated capacity; load centre printed 24 in (metric column 500 mm). |
| Lift / hinge-pin height | Not published | Linde Material Handling North America, 'H20 - H35 Technical Data', Series 1202 IC pneumatic-tire counterbalance trucks, August 2020 (page 3, H25-H35 columns); linked from linde-mh.us. Retrieved 2026-10-25 Mast table columns not clearly attributable in the PDF text; omitted rather than guessed. |
Similar models
| Brand | Model | Operating weight |
|---|---|---|
| Hyster | H50A | ≈ 3,865 kg |
| Yale | GP050VX | ≈ 3,810 kg |
| Mitsubishi | FD25N | ≈ 3,724 kg |
| Komatsu | FG25SHT-16 | ≈ 3,710 kg |
| Komatsu | FG25ST-16 | ≈ 3,710 kg |
| Toyota | 8FGU30 (Core IC Pneumatic) | ≈ 4,205 kg |
Compare side by side with Hyster H50A and Yale GP050VX