Home › Forklifts › Cat Lift Trucks
Cat Lift Trucks GP30N
Configuration: Dual fuel gasoline/LP gas, EK25E engine, 6,000 lb at 24 in load centre, standard two-stage mast, pneumatic tires
Dimension diagram
| A | Overall length | ≈ 2,718 mm |
| B | Overall height | ≈ 2,126 mm |
| C | Wheelbase | ≈ 1,699 mm |
| D | Ground clearance | ≈ 188 mm |
| E | Overall width | ≈ 1,275 mm |
| F | Track gauge / tread | ≈ 1,059 mm |
Weights
Dimensions
Undercarriage / tires
Ground pressure
| Spec | Value | Source |
|---|---|---|
| Ground pressure | Not published | Cat Lift Trucks GP15N-GP35N / DP20N-DP35N 'Productivity, Maximized' IC pneumatic tire lift trucks brochure (Logisnext Americas; linked from logisnextamericas.com/en/cat/products/ic-pneumatic-tire-forklifts/gp15n-gp35n-dp20n-dp35n; PDF dated 2026-04-01), specifications p.12-13. Retrieved 2026-10-25 Not published on the specification sheet. |
Axle loads
Engine
Hydraulics
| Spec | Value | Source |
|---|---|---|
| Pump / aux flow | Not published | Cat Lift Trucks GP15N-GP35N / DP20N-DP35N 'Productivity, Maximized' IC pneumatic tire lift trucks brochure (Logisnext Americas; linked from logisnextamericas.com/en/cat/products/ic-pneumatic-tire-forklifts/gp15n-gp35n-dp20n-dp35n; PDF dated 2026-04-01), specifications p.12-13. Retrieved 2026-10-25 Not published on the specification sheet. |
| System / relief pressure | ≈ 18 MPa | Published: 2,610 psi Cat Lift Trucks GP15N-GP35N / DP20N-DP35N 'Productivity, Maximized' IC pneumatic tire lift trucks brochure (Logisnext Americas; linked from logisnextamericas.com/en/cat/products/ic-pneumatic-tire-forklifts/gp15n-gp35n-dp20n-dp35n; PDF dated 2026-04-01), specifications p.12-13. Retrieved 2026-10-25Relief pressure for attachments (180 bar). |
Performance
Similar models
| Brand | Model | Operating weight |
|---|---|---|
| Komatsu | FG30HT-16 | ≈ 4,268 kg |
| Crown | C5 1050-50 | ≈ 4,277 kg |
| Komatsu | FG30SHT-16 | ≈ 4,282 kg |
| Toyota | 8FGU32 (Core IC Pneumatic) | ≈ 4,309 kg |
| Toyota | 8FGCU30 (Core IC Cushion) | ≈ 4,218 kg |
| Toyota | 8FGU30 (Core IC Pneumatic) | ≈ 4,205 kg |
Compare side by side with Komatsu FG30HT-16 and Crown C5 1050-50