Home › Motor graders › Case

Case 836D

Configuration: 836D (6x4, non-AWD) with EH controls, 3.35 m (11 ft) moldboard, 405/70R20 tires, front counterweight, 5-tooth rear ripper, ROPS cab, 79 kg operator, full fuel; FPT NEF N67 Tier 4 Final/Stage V.

20 sourced values · Sources: CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25

Check trailer fitDownload CSV

Dimension diagram

A B C D E F Side viewFront view Schematic, not to scale
AOverall length8,372 mm
BOverall height3,060 mm
CWheelbase5,351 mm
DGround clearance485 mm
EOverall width2,326 mm
FTrack gauge / tread1,923 mm

Weights

SpecValueSource
Operating weight12,018 kg
Published: 12,018 kg
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
836D (26,495 lb); 836D AWD 12 318 kg.
Max gross (laden) weightNot publishedCASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Not published in this document.

Dimensions

SpecValueSource
Overall length8,372 mm
Published: 8,372 mm
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Without ripper or front attachment.
Overall width2,326 mm
Published: 2,326 mm
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Distance between outside edges of tires (blade 3355 mm).
Overall height3,060 mm
Published: 3,060 mm
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Height to top of cab, low profile.
Wheelbase5,351 mm
Published: 5,351 mm
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Distance between tandem axles 1241 mm.
Track gauge / tread1,923 mm
Published: 1,923 mm
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Wheel tread, 13 × 20 one-piece rim.
Ground clearance485 mm
Published: 485 mm
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
At front axle (rear axle 310 mm).
Turning radius6,600 mm
Published: 6,600 mm
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Outside tire turning radius (AWD 6800 mm).

Undercarriage / tires

SpecValueSource
Undercarriage typeWheeled, articulated frame, tandem rear
Published: Wheeled, articulated frame, tandem rear
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Number of axles3
Published: 3
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Front axle plus tandem rear.
Wheels (count)6
Published: 6
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Tire size405/70R20
Published: 405/70R20
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
SPT9 Dunlop, standard.

Ground pressure

SpecValueSource
Ground pressureNot publishedCASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Not published in this document.

Axle loads

SpecValueSource
Axle load, front (unladen/operating)2,824 kg
Published: 2,824 kg
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Weight, front axle, 836D.
Axle load, rear (unladen/operating)9,194 kg
Published: 9,194 kg
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Weight, rear axle (tandem), 836D.
Axle load, front (laden/max)Not publishedCASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Not published in this document.
Axle load, rear (laden/max)Not publishedCASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Not published in this document.

Engine

SpecValueSource
Engine modelFPT NEF N67
Published: FPT NEF N67
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Printed as F4HGE614M*V003; Tier 4 Final/Stage V.
Net power102 kW
Published: 102 kW
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
At 2,100 rpm, ISO 14396/ECE R120, lower rating (137 hp); upper rating 115 kW (154 hp).
Gross powerNot captured—
Displacement6.7 L
Published: 6.7 L
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Rated speedNot captured—

Hydraulics

SpecValueSource
Pump / aux flow132.3 L/min
Published: 132.3 L/min
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Implement rated flow at 2,100 rpm, 836D EH (34.8 gpm); mechanical-control version 94.5 L/min.
System / relief pressureNot publishedCASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Implement relief not published; 150 bar listed is the steering pump relief.

Performance

SpecValueSource
Max travel speed41.9 km/h
Published: 41.9 km/h
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
6th forward, EH (26.0 mph); mechanical 39.9 km/h.
Blade / moldboard width≈ 3,355 mm
Published: 3.355 m
CASE 836D Motor Grader (Mechanical/EH controls) specifications sheet, form CCE202410836D; Tier 4 Final/Stage V. Retrieved 2026-10-25
Moldboard 11 ft, 526 mm high.

Similar models

BrandModelOperating weight
Caterpillar120 GC12,966 kg
John Deere620 P-Tier15,768 kg
John Deere670 P-Tier15,998 kg
Caterpillar12016,271 kg
John Deere770 P-Tier16,413 kg
John Deere622GP16,790 kg

Compare side by side with Caterpillar 120 GC and John Deere 620 P-Tier